Seiwa SW RP03 User Manual
Page 6
have to be deleted from the list (see "Deleting A Sentence From
the List").
Deleting A Sentence From the List
If all 12 list positions are full, one sentence will have to be deleted.
Press and hold the
and
keys for 10 seconds. Use the
and
keys to scroll through the list. When the sentence to
be deleted is displayed, press the
key for 1/2 second.
Manually Selecting A Data Channel
The SW RP03 searches each of the four data channels for the
desired sentence. When a matching sentence is found the
SW RP03 stops at that channel and displays the data. To select
between two or more data channels containing the same
sentence, press and hold the
key for 3 seconds. The SW RP03
will search the other channels for the sentence. If the sentence
is only available on the one channel, it will return back to the
original.
Downloading New NMEA Sentences
You can add up to 10 new sentences to Table 1 using a PC and
a serial data cable connected to channel 4 on the back of the
SW RP03 as shown in Figure 4. To upload a new sentence to the
SW RP03, press and hold the
and
keys for 10 seconds. The
instrument is ready for data transfer when "rdY" is displayed.
Now run the SW RP03 program software.
When a beep is heard check the display for the status of the
transfer, if "good" is displayed, the process was successful. If
"bAd" is displayed, the process was unsuccessful, try the
download process again.