Seiwa SW RP07 User Manual
Page 6
the
and
keys for ten seconds and use the
and
keys to
adjust the first start value to any number between 1 and 99
minutes. Press the
key to save the new value to memory.
To change the second race timer start value press and hold the
and
keys for ten seconds and use the
and
keys to adjust
the second start value to any number between 1 and 99 minutes.
Press the
key to save the new value to memory.
Calibrating Speed
To calibrate the displayed speed value, press and hold the
key
for ten seconds while viewing boat speed (until you hear a long
beep). Use the
and
keys to adjust the value to read correctly.
Press the
key to save the new value to memory.
Selecting Speed & Log Units of Measure
While viewing Speed, Average Speed, Trip Log or Permanent
Log, simultaneously press both the
and
keys to step through
U1 (Knots/N miles), U2 (MPH/Miles) and U3 (KPH/Km). The
units of measure for the logs will automatically be adjusted
according to the chosen units of measure for the speed.
Selecting Average Speed Damping
Press and hold the
and
keys for ten seconds while viewing
Average Speed (until you hear a long beep). Use the
and
keys to adjust the Speed Damping value to any number between
1 and 20. Press the
key to save the new value to memory.
The factory default Speed Damping is set to 10.
Calibrating Temperature
To calibrate the temperature value, press and hold the
key for
ten seconds while viewing water temperature (until you hear a
long beep). Use the
and
keys to adjust the value to read
correctly. Press the
key to save the new value to memory.
Selecting Temperature Units (Deg. C/F)
While viewing water temperature, press both the
and
keys
to toggle between C° and F°.
Calibrating Clock Speed
While viewing Elapsed Time, press and hold both the
and
keys for ten seconds (until you hear a long beep). Use the
and
keys to adjust the displayed value UP and DOWN from 50.
Raising the value above 50 makes the clock run faster, lowering
the value below 50 makes the clock run slower. Press the
key to save the new value to memory.