Figure 5 ais receiver dimensions, Figure 5, Ais receiver dimensions – Seiwa Si-Tex MDA2 User Manual
Page 13
Installation
Page 10
•
There should be adequate space around the AIS receiver for routing of cables. See Figure 5 for details of the AIS receiver
dimensions.
•
The ambient temperature around the AIS receiver should be maintained between -25°C and +55°C.
•
The AIS receiver should not be located in a flammable or hazardous atmosphere such as in an engine room or near to fuel tanks.
•
The AIS receiver is fully waterproof to ingress protection rating IPx7, however it is recommended that the AIS receiver is not
subjected to extended periods of exposure to spray or submersion.
•
It is recommended that the AIS receiver is installed in a 'below decks' environment.
•
It is acceptable to mount the AIS receiver either vertically or horizontally.
•
The product is supplied with four self tapping screws for attachment of the AIS receiver to a suitable surface. Please refer to Figure 6
for guidance.
•
The AIS receiver should be mounted in a location where the indicator is readily visible as this provides important information on the
status of the AIS receiver.
Figure 5
AIS receiver dimensions
140 mm
42 mm
100 mm
42 mm
128 mm