TotalPond PVC12005 - Manual (Page 2)

2
2. Dig out your pond and remove and debris or rocks that might
damage your liner. Add approximately 2in. of sand to the
pond area. The sand functions as a cushion beneath your
pond liner. Spread the sand over the entire area and
compact it. Fig. 2
Fig. 2
3. Open the liner and drape it across the pond area, making
sure to leave at least 10in. of overlap around the perimeter of
the hole. Begin to fill the pond with water, smoothing out any
wrinkles as you do this. Fig. 3
Fig. 3
4. When the pond is full, bury the excess liner in a small trench
around your pond with stones and rocks, according to your
landscape design. Fig. 4
Fig. 4
Printed in China