American Audio X-CALIBUR - Manual (Page 2)

©
American DJ Supply
®
www
.americandj.com X-Calibur™ Instruction Manual Page 4
©
American DJ Supply
®
www
.americandj.com X-Calibur™ Instruction Manual Page 3
•
This unit may blow a fuse if the maximum allotted load of 7 amps (220v = 5 amps) is reached. If the fuse needs replacement, always replace the fuse with same exact type that was remove. Use of a dif
ferent type fuse from that which is recommended may cause fire or electric shock and will void the manufactures warranty
•
To
reduce the risk of electrical shock or fi
re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit
•
Be sure that the local power outlet match that of the required voltage for your unit
•
Do not attempt to operate this unit if the power cord has been frayed or broken
•
Do not attempt to remove or break of
f the ground prong from the
electrical cord.
This prong is used to reduce the risk of electrical
shock and fi
re in case of an internal short
•
Disconnect
from main power before making any type of connection
•
Do not remove the cover under any conditions.
There are no user
serviceable parts inside
•
Never operate this unit when it’
s cover is removed
•
Never plug this unit in to a dimmer pack
•
Always be sure to mount this unit in an area that will allow proper ventilation.
Allow about 6” (15cm) between this device and a wall
•
Do not attempt to operate this
unit,
if
it
becomes damaged
•
This unit is intended for indoor use only
, use of this product outdoors
voids all warranties
•
During long periods of non-use, disconnect the unit’
s main power
•
Always mount this unit in safe and stable matter
•
Power cords should be routed so they are not likely to be walked on, pinched by items placed upon or against them.
• Cleaning -The fi
xture should be cleaned only as recommended by
the manufacturer
. See page 7 for cleaning details
•
Heat
-The
appliance
should
be
situated
away
from
heat
sources
such as radiators, heat registers, stoves, or other appliances (including amplifi
ers) that produce heat.
•
The fi
xture should be serviced by qualifi
ed service personnel when:
A.
The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C.
The unit has been exposed to rain or water
.
X-Calibur™
Safety Pr
ecautions
• 4 Channel DMX Scanner • Easy Programmability. • Midi Compatible • Rear on/of
f switch
• Built in fuse protection • Separate color and gobo wheels • 8 dynamic gobo plus spot • 9 vibrant colors plus white • Option settings for; Focus, Self
T
est, Inverted pan and
Inverted tilt •
Adjustable focus
• Standard DMX -512 protocol • Stepper motor operation for smother operations • Strobe from 1 to 7 FPS • Lamp switches of
f after 30 seconds in blackout mode
• Easy access to lamp and lamp socket • High output cooling fan Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit.
These instruc-
tions contain important information regarding safety during use and maintenance. Please keep this manual with the unit, as future refer- ence. X-Calibur™
Featur
es
X-CaliBUR™
General Instructions
X-Calibur™
W
arranty Registration
The X-Calibur™ carries a one year (365 days) limited warranty. We recommend
you
fill
out
the
enclosed
warranty
card
to
validate
your
purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must provide a copy of your proof
of
purchase
invoice.
Please
contact
American
DJ
® customer
support for a R.A. number.