Vollrath KDC1418-3-06 Acrylic Knock Down Bakery Display Cases User Manual
Page 2
www.Vollrath.com
The Vollrath Company, L.L.C.
1236 North 18th Street
Sheboygan, WI 53081-3201
U.S.A.
Main Tel: 920.457.4851
Fax: 800.752.5620
Technical Services: 800.628.0832
Service Fax: 920.459.5462
Canada Service: 800.695.8560
© 2014 The Vollrath Company, L.L.C.
4. Repeat the process attaching the small bent top panel (F) using (3) machine
screws (A). See Figure 3.
A
F
Figure 3. Install Small Bent Top Panel
5. With rails facing inward, gently attach opposite side panel (E) to display
using (6) machine screws (A). See Figure 4.
A
E
Figure 4. Install Opposite Side Panel
CAUTION
DO NOT overtighten screws and hardware.
6. Attach clear handles (C) to front door panels (H) and both rear doors using
machine screws (A) and self-locking nuts (B). See Figure 5.
C
H
B
A
Figure 5. Install Handles
7. Connect (3) front door panels (H) to side panels (E) using clear post and
screw sets (D). See Figure 6.
E
H
D
Figure 6. Install Front Door Panels
8. Open each front door and install trays.
9. Clean using very soft cloth and clean water. Avoid abrasive chemical and
glass cleaners, ie: Windex
®
, Simple Green
®
. Clean using warm water and a
dilute mild dish soap (Dawn
®
or Joy
®
). Wipe acrylic lightly using soap mixture
and rinse with plain water using a soft cloth. A microfiber towel or clean
chamois is preferred. DO NOT USE PAPER TOWELS!