Changing the carbon filter, Replacing the light bulb – AEG SANTO 72358 KA3 User Manual

Page 26

Advertising
background image

Maintenance and Cleaning

26

818 35 69-02/2

Changing the carbon filter

To maintain the best performance
the carbon filter should be chan-
ged once a year with normal
usage.
New carbon filters can be purcha-
sed from your local Service Force
Centre.

0

1. The filter is placed behind the grill

and can be reached by opening
the cover. The cover can be ope-
ned by simultaneously pressing
the lever on the right of the grill
(1) and pulling the cover outward
(2).

2. The carbon filter is then pulled

out of its slot (3).

3. The new carbon filter is placed in

the existing slot.

1

The filter should be handled care-
fully so fragments do not loosen
from the surface.

Replacing the Light Bulb

1

Warning! Danger of electrical shock! Before replacing the light bulb
switch appliance off and remove the mains plug.

Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14

Important!
When replacing the lamp only fit a
lamp of suitable diameter, that is at
least 18 mm, this will ensure a good
seat on the rubber seal.
Where to purchase: specialist
retailer or AEG Service Force Centre.

Advertising