Kodak DP800 - Manual (Page 11)

Contents
11
Using composite video
1. Find the Composite video cable, and the audio
cable. See page 6, All cables and adapters are
provided with the Projector.
2. Make sure that the video source and the Projector
are switched off. Connect the Composite video
cable (see page 6) from the Video out connector of
the video source to the Composite video connector
on the Projector plug panel, see fig. 6. Connect the
audio cable from the Audio out connectors of the
video source to the Composite Audio in connectors
on the Projector. Connect the red plug to the red
connector, and the other plug to the white connec-
tor. Red is the right stereo channel.
3. Connect the power cable from the Projector to the
wall outlet.
4. When all the connections are done and verified,
switch on the video source, and then switch on the
Projector.
5. The Projector will now automatically display the
pictures from the video source. If not, see the
section
Trouble shooting.
You can connect external speakers to the Projector
from the Audio out connectors on the plug panel.
5 Connecting the Projector to your video player
RGB INPUT COMPOSITE
VIDEO PC/COMMON
AUDIO IN
COMP.VIDEO S.VIDEO AUDIO OUT
LEFT
RIGHT
SUPER-
VIDEO
MIC
Connect to video
out part of VCR
Plug panel
R L
Connect to VCR audio out
Fig. 6. Connecting to a composite video source