Kodak M1020 - Manual (Page 18)

Doing more with your frame
18 www.kodak.com/go/easysharecenter
Printing pictures
1 Make sure your frame is disconnected from the
printer (Pictbridge enabled).
2 On the frame, change your connection mode to
Printer by tapping (Home)
→
(Settings)
→
Device configuration
→
USB connection mode.
3 Turn off the frame and printer.
4 Connect the USB cable from the frame to the printer.
5 Turn on the frame and printer.
6 In slide show or single view, tap (Menu), then (Print).
In thumbnails view, see page 17 to print multiple pictures.
NOTE: Remember to change your connection mode back to Computer when you are done.