Kodak CX6230 User Manual
Page 91
79
Chapter 10
In Review mode,
you do not see a
picture (or the
expected picture)
on the camera
screen.
The camera may not be
accessing the correct
storage location.
Check the picture storage location
setting (
Picture is too
dark.
Flash is not on.
Turn on the flash (
The subject is too far
away for the flash to
have an effect.
Move so there is no more than
12.8 ft (3.9 m) between the
camera and the subject.
The subject is in front
of a bright light
(backlit).
Use Fill flash (
your position so light is not
behind the subject.
Not enough light.
Increase Exposure Compensation
(
Picture is too
light.
The flash is not needed. Change to Auto flash or Flash Off
The subject was too
close for flash.
Move so there is at least 1.6 ft (0.5
m) between camera and subject.
The light sensor is
covered.
Hold the camera so your hands or
other objects do not cover the
light sensor.
Too much light.
Decrease Exposure Compensation
(
Problem
Cause
Solution