Kodak DP850 Ultra - Manual (Page 13)

Contents
13
Cable
When you are connected to a cable system you have
two options. If you have a cable decoder you set your
TV to the channel for the cable, and then you use the
remote control for the decoder to switch between chan-
nels. If you do not have a decoder you simply set your
TV up just like you would with an antenna. This is also
the same with the KODAK DP850 ULTRA. You must
scroll the channel name in the TV Setup menu until you
find the correct channel for your cable system. When
this channel has been assigned to one of the program
numbers you simply select this program and use the
remote control or control panel to switch between
channels. Satellite
This works like the cable decoder meaning that you
select the channel that reads the signals from the
atellite dish. Then you use the remote control of the
decoder to switch between channels.
1214 (ELEK). KODAK ENG 05-05-98 11:41 Side 13