Kodak CD83 User Manual

Page 47

Advertising
background image

Getting help

www.kodak.com/go/support

41

Computer/connectivity problems

Picture quality problems

You cannot take a
picture

Turn the camera off, then on again.

Depress the Shutter button all the way (see

page 5

).

Insert new or charged batteries (see

page 2

).

Memory is full. Transfer pictures to the computer (see

page 36

),

delete pictures (see

page 21

), or insert another card.

Memory card not
recognized or camera
freezes with card

Card may be corrupted. Format the card in the camera (

see

page 35

).

Use another memory card. Only SD or SDHC Cards are supported.

Cannot find the
desired picture/video

To view pictures on a card or in internal memory,

see page 20

.

Status

Solution

Computer does not
communicate with
the camera

Make sure the batteries are charged and installed correctly (see

page 2

).

Turn on the camera.

Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (see

page 36

).

See KODAK Software Help at

www.kodak.com/go/camerasw

.

Status

Solution

Picture is not clear

To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.

Clean the lens (see

page 46

).

Make sure the camera is not in Macro mode (

see page 32

) if you are

more than 27.6 in. (70 cm) from your subject.

Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).

Status

Solution

Advertising