Kodak SLICE User Manual

Page 51

Advertising
background image

Getting help

www.kodak.com/go/support

45

Stored pictures are
corrupted.

Retake pictures. (Do not remove card while the camera is on. Keep
rechargeable battery charged.)

Transfer the pictures to the computer (

page 37

), then format the card

or internal memory (

see page 36

).

Caution: Formatting a card deletes all pictures and videos,
including protected files.

In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.

Check the image storage location setting (

page 36

).

In Review mode, a
blue or black
screen is displayed
instead of a
picture.

Transfer the picture to the computer (

page 37

), then format the card or

internal memory (

see page 36

).

Caution: Formatting a card deletes all pictures and videos,
including protected files.

Shutter button
does not work.

Turn on the camera (

page 3

).

Transfer pictures to the computer (

page 37

), delete pictures from the

camera (

page 21

), switch image storage locations (

page 36

), or insert

a card with available memory (

page 5

).

Picture is too light.

Move so there is at least 2 ft (0.6 m) between the camera and the
subject.

Turn off the flash, or move further from the subject.

Decrease Exposure Compensation (

page 16

).

Picture is not clear.

Clean the lens (

page 54

).

Make sure your camera is not in Close-up mode (

page 6

).

Move so there is at least 2 ft (0.6 m) between the camera and the
subject.

Press the Shutter button halfway to focus and set exposure. When the
framing marks turn green, press the Shutter button completely down.

Place the camera on a steady surface.

If

Try one or more of the following

Advertising