Kodak M580 - Manual (Page 51)

Troubleshooting
www.kodak.com/go/support 45
Picture quality problems
Status Solution
Picture is not clear ■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ Clean the lens ( see page 50 ).
■ Make sure the camera is not in Macro mode ( see page 35 ). For focus
ranges, see Camera Specifications starting on page 48 .
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size ( see page 33 ).
■ If you’re manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures (
see page 34 ).
Picture is too dark ■ Reposition the camera for more available light.
■ Use Fill flash ( see page 10 ) or change your position so light is not
behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 48 .)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, adjust the Exposure Compensation ( see page 34 ).
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off ( see page 10 ).
■ Move so that the distance between you and the subject is within the
effective flash range. (See Camera Specifications starting on
page 48 .)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program mode, adjust the Exposure Compensation ( see page 34 ).