Scan troubleshooting, Scan fails, Scanned image blank – Kodak ESP 3 User Manual

Page 59

Advertising
background image

Support

Corrective Action

When the original is larger than the paper loaded, use the Fit to Page feature to reduce copy size
to fit the size of the paper loaded.

Scan Troubleshooting

Scan Fails

Probable Cause 1

Your computer is not turned ON.

Corrective Action

Turn on your computer.

Probable Cause 2

Your Kodak printer is not connected to your computer.

Corrective Action

Connect your Kodak printer to your computer with a standard USB cable.

Probable Cause 3

The Kodak Home Center software is not installed.

Corrective Action

Insert the Kodak printer installation CD and install the software.

Probable Cause 4

Your computer system resources may be low.

Corrective Action

Turn off your computer and the printer, and then turn them back on.

If the problem still persists, try scanning at a lower resolution.

Scanned Image Blank

Probable Cause

Your original is not placed correctly on the scanner glass.

Corrective Action

Place your original face down in the proper corner of the scanner glass.

Advertising