Kodak S730 - Manual (Page 5)

www.kodak.com/go/digitalframesupport 3
1
Getting started
Setting up the stand
Attaching the power cable
CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Pull to adjust the frame angle for
best viewing.
Your frame displays pictures in landscape
orientation .
To change to portrait orientation , turn the
frame on its side.
Charge the battery (installed at the factory)
by leaving the power connected for at
least 3 hours. The frame does not need to
be turned on.
Your power cable may look different
from the one pictured. Use the plug
that accommodates your type of
power outlet.