Asante Technologies PCMCIA - Manual (Page 16)

APPENDIX
- P AGE 16 -
5. APPENDIX: PRODUCT SPECIFICATIONS
IEEE 802.3 10BaseT, 10Base2
10Mbps speed
Internal buffer memory, No system memory used
Operating Environment
Windows 95
Windows 98
Microsoft Windows NT 4.0
Microsoft Windows 2000
Windows Me
Macintosh OS 8.6
Physical
PCMCIA Type II
3.37 in. x 2.128 in. x 0.197 in.
85.6mm x 54mm x 5mm
Weight: 30 g
Power: +5V ±5%, @150mA
PCMCIA Type II
A media coupler with RJ-45 socket for 10BaseT LAN only or a media coupler with both
RJ-45 and BNC connector for either 10BaseT or 10Base2 LAN.
6. REGULATORY STATEMENTS
FCC Part 15 Registration
This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions:
This device may not cause harmful interface, and
This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy, and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning off and on, the user is