Lenovo ThinkVantage (Client Security Solution 8.21) - Manual (Page 63)

*****************************************************
** Ready to take sysprep backup.
**
** **
** PLEASE RUN SYSPREP NOW AND SHUT DOWN. **
** **
** Next time the machine boots, it will boot **
** to the Predesktop Area and take a backup. **
*****************************************************
7. Run your Sysprep implementation.
8. Shutdown and reboot your machine. It will start the backup process in Windows PE.
Note: The message: “Restore in progress but a backup is occurring” is displayed. After the backup,
turn the power off, do not restart.
Sysprep Base Backup is now complete.
Scenario 2
This is an example installation on a laptop using these hypothetical customer requirements:
• Administration
– Install on machines where previous versions of Client Security Solution are installed.
– Use the domain administrator account for administration of the computer.
– All computers have a BIOS supervisor password, BIOSpw.
• Client Security Solution
– Utilize the Trusted Platform Module.
– All machines have the security chip.
– Enable Password Manager.
– Using the user’s Windows password as authentication to Client Security Solution.
– Encrypt the Client Security Solution XML Script with password = "XMLscriptPW".
– The password protects the Client Security Solution configuration file.
• ThinkVantage Fingerprint Software
– Do not want to use BIOS and hard drive passwords.
– Logon with Fingerprint software.
– After an initial period for self-user enrollment, the user will switch to Secure Mode logon requiring
a fingerprint for non-administrator users, thus effectively enforcing a dual factor authentication
methodology.
– Include the Fingerprint tutorial.
– The end-users can learn how to properly swipe their finger and get visual feedback on what they
may be doing wrong.
On the preparation machine:
1. From the off state, start the computer and press F1 to go into BIOS and navigate to the security menu
and clear the security chip. Save and exit the BIOS.
2. Login with the Windows domain administrator account.
3. Install the ThinkVantage Fingerprint software running the f001zpz2001us00.exe to extract the setup.exe
file from the Web package. This will automatically extract the setup.exe to the following location:
C:\SWTOOLS\APPS\TFS5.8.2-Buildxxxx\Application\0409\setup.exe (where xxxx is the build ID).
Chapter 6 . Best Practices 57