Lenovo IdeaPad Y710 - Manual (Page 15)

En-
OneKey Rescue System 6.0 V1.0 EN 147001728
English
3. What can I do if the recovery process fails?
If you can start the recovery feature without a problem, but it fails
during the recovery process, this may be caused by one of the
following reasons:
The backed up files were damaged
The disc(s) were physically damaged
Other unknown issues
In this case, please select other backed up files and try to recover
them. If it still doesn’t work, you can use Restore to Factory
Default feature to restore your system partition to factory default.
Please note your data on system partition will be lost during this
restore process.
4. Why can’t I find the backed up files during recovery process?
In OneKey Rescue System, the disk partition structure is different
from Windows system. Therefore you may not be able to find the
backed up data in the Windows backup path. In this case, you can
change to another disk partition and try to locate backed up data
in the folders of other partitions, then continue to complete the
recovery process.
•
•
•
Lenovo OneKey Rescue System 6.0 12 12 2008/5/27 17:29:20