Selecting the temperature format, Temperature display and setting, Power outage – Aube Technologies TH209 User Manual

Page 2: Specifications, Troubleshooting, Warranty, Technical assistance

Advertising
background image

TH209

400-209-000-A 2008-06-19 2/2

To select the temperature display format:

n

Press the Up and Down buttons for three seconds.
The format currently used will be indicated on the
screen.

o

Press the Up or Down button to change the
format.

p

Press the Up and Down buttons for one second (or
wait for one minute) to return to the normal display.

The thermostat normally displays the actual (ambient) temperature.

To view the setpoint temperature, press once on
either temperature adjustment button. The setpoint
will be displayed for 5 seconds. The icon

appears during the setpoint display.

To change the setpoint temperature, press the
appropriate button until the desired value is displayed.

During a power outage, the setpoint is saved in memory. You do not
need to adjust the temperature when power returns.

- Supply: 120/240 VAC, 50/60 Hz

- Minimum load: 0.83 A (resistive only)

200 W @ 240 VAC
100 W @ 120 VAC

- Maximum load: 8.3 A (resistive only)

2000 W @ 240 VAC
1000 W @ 120 VAC

- Display range: 0 °C to 50 °C (32 °F to 122 °F)

- Setpoint range: 5 °C to 30 °C (40 °F to 85 °F)

- Storage: -20 °C to 50 °C (-4 °F to 120 °F)

- Heating cycle length: 15 seconds

- Approval:

Aube warrants this product, excluding battery, to be free from defects in the
workmanship or materials, under normal use and service, for a period of three
(3) year from the date of purchase by the consumer. If at any time during the
warranty period the product is determined to be defective or malfunctions,
Aube shall repair or replace it (at Aube's option).
If the product is defective,
(i)

return it, with a bill of sale or other dated proof of purchase, to the place
from which you purchased it, or

(ii)

contact Aube. Aube will make the determination whether the product
should be returned, or whether a replacement product can be sent to
you.

This warranty does not cover removal or reinstallation costs. This warranty
shall not apply if it is shown by Aube that the defect or malfunction was
caused by damage which occurred while the product was in the possession of
a consumer.
Aube's sole responsibility shall be to repair or replace the product within the
terms stated above. AUBE SHALL NOT BE LIABLE FOR ANY LOSS OR
DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY
BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER
FAILURE OF THIS PRODUCT. Some provinces, states or regions do not
allow the exclusion or limitation of incidental or consequential damages, so
this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY AUBE MAKES ON
THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE-
YEAR DURATION OF THIS WARRANTY. Some provinces, states or regions
do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights
which vary from one province, state or region to another.

705 Montrichard
Saint-Jean-sur-Richelieu, Quebec
J2X 5K8
Canada
Tel.: (450) 358-4600
Toll-free: 1-800-831-AUBE
Fax: (450) 358-4650
Email: [email protected]

For more information on our products, go to

www.aubetech.com

p

Selecting the Temperature Format

3.

q

Temperature Display and Setting

4.

r

Power Outage

5.

s

Specifications

6.

t

Troubleshooting

7.

PROBLEM

SOLUTIONS

Thermostat is hot.

This is normal. Under normal operation, the ther-
mostat housing can reach a temperature
between 35 °C (95 °F) and 40 °C (104 °F).

Displayed tempe-
rature is wrong.

Remediate if any the following conditions
applies:

The thermostat is exposed to air draft.

The sticker on the thermostat’s screen has
not been removed.

The thermostat is located near or above a
heat source such as a light dimmer.

Display disappears
and reappears after
a few minutes.

The thermal protection device on the heater has
temporarily opened. This can happen if the
heater is obstructed by furniture or curtain and
has overheated, or if the heater’s thermal protec-
tion device is too sensitive.

;

Warranty

8.

Technical assistance

9.

400-209-000-A (TH209) ENG.fm Page 2 Thursday, June 19, 2008 8:43 AM

Advertising