Ashly LX-308B - Manual (Page 9)

9
Operating Manual - LX-308B Stereo Line/Microphone Mixer
10. SPECIFICATIONS
DISTORTION
THD at +20 dBu, 20Hz-20KHz . . . . . . . . . . . . . <0.02%
IMD (SMPTE) at +20dBu . . . . . . . . . . . . . . . . . . <0.01%
HUM & NOISE (20Hz-20KHz)
residual output noise, all levels at minimum
<-100dBu
MASTER OUT, MASTER LEVEL and one
INPUT LEVEL at nominal (unity gain) . . . . . <-87dBu
FREQUENCY RESPONSE
20Hz-20KHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.2dB
VOLTAGE GAIN (dB±1)
INPUTS or SUB INPUTS to
MASTER OUTPUTS (levels at nominal) . . . . . . . . 0dB
INPUT to MASTER OUTPUT (levels at max) . . . 25dB
Ch.1 or Ch.2 INPUT in MIC position to
MASTER OUTPUTS . . . . . . . . . . . . . . . . . . . . . . . . 56dB
SUB INPUTS to MASTER OUTPUTS
(master level at max) . . . . . . . . . . . . . . . . . . . . . . . . 18dB
CROSSTALK
adjacent inputs or input to output at 1KHz . . . . <-80dB
adjacent inputs or input to output at 20KHz . . <-60dB
VU METERS
Two 5-segment LED meters. . . . . . . . . . . . . 0VU=+4dBu
PEAK INDICATORS
activated when internal signal is 3dB below clipping
SHIPPING WEIGHT
9 lbs. maximum
POWER REQUIREMENTS
120 VAC nominal, 93 VAC minimum, 50-60 Hz,
12 watts (240 VAC available)
*unless otherwise stated, specification conditions are:
150
Ω
source, all levels set at nominal, outputs into 2.7K
Ω
or greater.