Lenovo IdeaCentre A530 User Manual
Page 56
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the base cover. Refer to “Removing the base cover”.
Step 5.
Disconnect the scalar headphone input, scalar and DVI/HDMI cables from the connectors on
the motherboard.
Step 6.
Remove the 6 screws that secure the hinge to the chassis
1
, then lift up the hinge to remove it
from the chassis.
2
1
2
Step 7.
To reattach the hinge to the chassis:
a.
Line up the hinge with the chassis and slide the hinge into position.
b.
Secure the hinge to the chassis with the 6 screws.
c.
Reconnect the scalar headphone input, scalar and DVI/HDMI cables to the motherboard.
Step 8.
Reattach the base cover and secure it with the screws.
50
IdeaCentre A530 All-In-One PC Hardware Maintenance Manual