Installing or replacing a pci card – Lenovo M5800 Desktop User Manual

Page 77

Advertising
background image

To remove and reinstall the front bezel, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 69.

3. Remove the front bezel by releasing the three plastic tabs on the left side and pivoting the front bezel

outward.

Figure 7. Removing the front bezel

4. To reinstall the front bezel, align the three plastic tabs on the right side of the front bezel with the

corresponding holes in the chassis, then pivot the front bezel inwards until it snaps into position on
the left side.

5. To complete the installation or replacement, go to “Completing the parts replacement” on page 102.

Installing or replacing a PCI card

Attention:
Do not open your computer or attempt any repair before reading and understanding Chapter 1 “Safety information”
on page 1.

This section provides instructions on how to install or replace a PCI card. Your computer has two PCI
Express x1 card slots and one PCI Express x16 graphics card slot.

To install or replace a PCI card, do the following:

1. Turn off the computer and disconnect all power cords from electrical outlets.

2. Remove the computer cover. See “Removing the computer cover” on page 69.

Chapter 8

.

Replacing FRUs

71

Advertising