Lenovo ThinkVision LT2452p Wide 24in LCD Monitor User Manual
Page 19
To use the controls:
1. Press
to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press
to access
that function. If there is a sub-menu, you can move between options using
or
then press
to select that function. Use or to make adjustments. Press to
save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow
adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the
button for
10 seconds to disable / enable DDC/CI function. The words “DDC/CI Disable” or
“DDC/CI Enable” will be displayed.
Chapter 2. Adjusting and using your monitor
2-4