Getting started, Package contents – Airlink101 AICN500 User Manual
Page 2
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Getting Started
Step 1
Connect one end of the Ethernet cable to the IP Camera and connect
the other end to one of the LAN ports on your router or switch.
Step 2
Power on the IP Camera by connecting one end of supplied power
adapter to the power jack of the Camera and connecting the other end to the
electrical outlet.
Step 3
Verify that the yellow light (Power) is solid and the green light (Link) is
blinking.
Section 1
Package Contents
:
• Night Vision Network Camera
• Camera Stand
• Power Adapter
• Ethernet Cable (Cat.5)
• Utility CD
• Quick Installation Guide