Airlink101 ATVC102 - Manual (Page 18)

17
Press OK to start and stop the Auto Scan at any time.
8-3. Menu > Scan > Manual Scan
From this menu, you can scan for channels one at a time without
removing the previously auto scanned channels. If during the auto scan,
some of the channels that you like to watch were not found, you can
attempt to find additional channels by changing the position of your
antenna and performing a ‘‘Manual Scan’’ for individual channels.
Note: You can tell which channels were found during Auto Scan by
checking to see if there is a number next to ‘‘Programs’’ under the quality
indicator.
Note: TV stations will have a new digital channel numbers that is different
from their old analog channel number that you were used to watching.
Instead of finding your old favorite channel by scanning the old analog
channel number, you will need to scan using the new digital channel
number or frequency. To simplify the transition, most TV Stations are
being allowed to use the same old analog channel number (virtual
channel number) followed by a -1 (dash 1). However, you must first scan
the new digital channel number before using the virtual number. Contact
your local TV station to find their digital channel number or frequency
Press OK to start the Manual Scan.
Press / to select specific frequency channel.
Selected Channel Channel list
Quality indicator