Using the on-screen display (osd) controls, Using the direct access controls -3, Using the on-screen display (osd) controls -3 – Lenovo L215 Wide Flat Panel Monitor User Manual
Page 14: Then press
2-4
L215 Wide Flat Panel Monitor User’s Guide
Using the On-Screen Display (OSD) controls
To adiust the settings, the user controls can be viewed through the OSD.
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
to move among the icons. Select an icon and press
to access that
function. If there is a sub-menu, you can move between options using
or
,
then press
to select that function. Use
or
to make adjustments. Press
to
save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
for 10 seconds to unlock the OSD and
allow adjustments to the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold the button for 10
seconds to disable / enable DDC/CI function. The words "DDC/CI disable"
shows on the screen.