Lenovo ThinkStation P300 - Manual (Page 102)

• To complete the installation or replacement, go to “Completing the parts replacement” on page 111.
Installing or replacing the mSATA solid-state drive
The mSATA solid-state drive is only available on some models. This section provides the following
instructions:
• “Installing the mSATA solid-state drive” on page 90
• “Replacing the mSATA solid-state drive” on page 91
Installing the mSATA solid-state drive
Attention: Do not open your computer or attempt any repair before reading and understanding the “Read
this first: Important safety information” on page v.
To install the mSATA solid-state drive, do the following:
1. Insert the mSATA solid-state drive into the mini PCI Express slot on the storage converter shipped with
the mSATA solid-state drive, and then press the mSATA solid-state drive downward.
Figure 36. Installing the mSATA solid-state drive into the storage converter
2. Install the two screws to secure the mSATA solid-state drive to the storage converter.
Figure 37. Installing the screws to secure the mSATA solid-state drive
90 ThinkStation P300 User Guide