ATTO Technology R348 v - Manual (Page 11)

6
For Windows Vista
• Windows Vista detects your adapter and
automatically installs the required drivers.
If drivers do not load, refer to Install drivers on
page 3 and Troubleshooting on page 11.
8 Connect SAS devices: insert SAS cable from each
device to a connector on the ATTO ExpressSAS host
adapter until you hear a click.
Use the ATTO Configuration Tool to configure RAID
groups. Refer to the ATTO Utilities Installation and
Operation Manual for complete information.
Bracket details
Exhibit 3-1 The ExpressSAS R348 Adapter brackets Exhibit 3-2 The ExpressSAS R380 Adapter brackets