Alloy Computer Products 16-PORT GIGABIT WEB SMART SWITCH GSS-16T2SFP - Manual (Page 42)

36
4-2-9. Bandwidth Management
Function name:
Bandwidth Management
Function description:
The Bandwidth Management function is used to set Ingress and Egress
bandwidth limits for each port.
Fig. 4-19
Parameter description:
Port Number:
Select the port which you want to add a Rate control policy to. Optionally
you can select to control all ports at the same time from the “All” selection.
All Traffic for Ingress Rate Limiting:
Define the rate for incoming traffic on the selected port. Incoming traffic will
be discarded if the rate exceeds the value you set up in Data Rate field.
Pause frames are also generated if flow control is enabled. The limited
format of the packet includes unicast, broadcast and multicast. Valid range
is 0~1000.
Broadcast & Multicast for Ingress Rate Limiting:
Define the rate for incoming Broadcast and Multicast traffic on the selected
port. Incoming traffic will be discarded if the rate exceeds the value you set
up in Data Rate field. The limited format of the packet only includes
broadcast and multicast. Valid range is 0~1000.