Audiovox PAV-9 - Manual (Page 13)

11
SELECTING MODE
Press the MODE button to select the desired mode. Each time you press the button, the
mode changes as follows.
RADIO -> AV1 -> AV2 -> AV3 (CD/DVD CHANGER) -> AV4 (TV)
NOTE
1. AV3 has only a video input.
2. The CD/DVD changer must be connected to the 8 pin DIN socket on the rear of the unit
with 8 pin DIN cable in our CD or DVD changer gift box.
3. The video output of CD or DVD changer must be connected to the AV3 video input. If
the video output of changer is not connected to AV3 video input, AV3 video input can be
used for a video input of another video source.
ADJUSTING VOLUME
Press the VOLUME or button to adjust the volume level.
AUDIO MUTE
Press the MUTE button to mute the audio. Press the MUTE button or the volume or
again to return to the previous audio level.
RESET
1. If the unit does not seem to be working right, press the RESET switch with a pencil or
other pointed object. The RESET switch is mounted behind the small hole on the upper
right of the front face, to the left of the AUDIO INPUT jack.
2. If the RESET switch is pressed, the power will turn off, press the POWER button to turn
the power on.
3. If reset does not solve the problem, consult your installer.