Lenovo ThinkVantage Access Connections - Manual (Page 13)

4. Click on Add/Delete under Associated MAC / IP Address for selected profile. This allows the setting
of MAC or IP addresses of the network router(s) to be associated with an Ethernet enabled profile for
location switching. This will prevent the pop-up message when connecting an unknown Ethernet
connection with location switching enabled.
Figure 5. Adding or Deleting MAC or IP Addresses
Figure 6. Entering MAC or IP Address
5. Define the Access Connections policy settings for the following options:
• “Distribution Control List with this package” on page 10
• “Client Configuration Policy” on page 11
• “PAC AID Groups (Windows XP only)” on page 20
• “Allow silent import of this package after client installation” on page 23
• “Select active location profile” on page 23
6. Click the Create button located at the bottom of the Create Distribution Package window.
7. When prompted, enter a passphrase to encrypt the *.loa file. This same passphrase will be required to
import the deployment package (*.loa) on client systems. The passphrase is also encrypted in a *.sig file
which is needed to import the deployment package silently.
Chapter 3 . Working with the Administrator Feature 9