Americana Appliances ABS300 - Manual (Page 7)

A HOT SURFACE indicator light will glow when any
radiant element is turned on, and will remain on until
the surface is cool enough to touch.
A SURFACE UNIT on indicator light will glow when any
surface unit is on.
NOTE: The SURFACE UNIT on indicator light may glow between
the surface control settings of LO and OFF, but there is no power
to the surface units.
7
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either
direction to the setting you want. At both OFF and HI the control clicks into
position. You may hear slight clicking
sounds during cooking, indicating the
control is keeping the power level you set.
Operating
Instructions
Care and Cleaning
Installation Instructions
Tr
oubleshooting T
ips
Safety Instructions
Consumer Support
Be sure you turn the control knob
to OFF when you finish cooking.
Indicator Lights (on radiant glass models only)
Using the surface units.
www.AmericanaAppliances.com