Additional information, Sleep versus off – Audiovox ECCO 128-8854 User Manual
Page 8
8/12
128-8854
Page 8
Additional Information
Sleep Versus Off
You can manually put the unit to
Sleep or turn the device Off
by using
return (e3).
•
To put the unit to
Sleep: press and hold return
(e3) until the LCD message Sleep appears.
•
To turn the unit
Off (only during the Searching
mode or at start-up): press and hold
return
(e3), and the message Off appears on the
LCD.
In both the
Sleep mode and the Off state, the LCD
backlight and LEDs are dark. The main difference is
that in
Sleep mode, the unit attempts to refresh GPS
positioning data dynamically within a period of 5
hours. The other difference is the LCD message that appears
as the unit shuts down: either
Sleep or Off.
Note: After 5 hours in Sleep mode, the unit times out to the
Off state.
The unit will automatically go to
Sleep if:
•
You do nothing for 1 minute while one of these
messages appears on the LCD:
Ready
Select location
Location 1, 2, or 3 selected
•
You do nothing after
Found is displayed on the
LCD for about 2 minutes.
•
Searching displays on the LCD for about 2
minutes; then the message
No GPS appears
on the LCD, and the red
LED indicator (e1) is
steady.
•
Traveling more than 2 minutes off-course
(more than 22.5°, headed in the opposite
direction, or
distance (d6) is increasing) and
the red
LED indicator (e1) is blinking.
•
No GPS data is received for about 5 minutes,
the LCD message
No GPS appears and the
red
LED indicator (e1) is steady.
•
No change in GPS data for about 5 minutes,
the LCD message
No Movement appears, and
the red
LED indicator (e1) is steady.