Airlink101 AICP310 User Manual
Page 7
Advertising
Step 3
If the Camera’s default IP address is on a different subnet, the following
message will appear. Click Yes to continue. If you do not receive this message,
skip to
Step 6
.
Step 4
Enter admin for both the Admin ID and Password and click OK.
Step 5
The Wizard will automatically generate an IP address for the camera, if
this address is not in use by any other device in your local network, click OK.
Otherwise, enter an available IP address (ex. 192.168.x.240) and click OK.
Advertising