Sp console management option, Table 1.2: sp console power management options – Avocent 5240 User Manual
Page 17
Chapter 1: Introduction 5
Only one administrative user can be connected to the MergePoint 5224/5240 SP manager at a time.
Regular users may be authorized for access to management features available on the connected SPs
or other types of target devices.
NOTE: The administrator may create and enable a custom security profile that has the override authorization
feature set, which causes all authenticated users to have all access to all target devices. For details, see Security
Profiles’ Effects on Users’ Actions on page 14.
Table 1.1 shows which management options are available on the supported SP types and on
supported devices without SPs.
NOTE: When a target device does not have an SP, Target Device Console, native IP and DirectCommand are
the only management options available by default. The target device types may be customized to make other
management features available.
SP console management option
Table 1.2 shows the SP console management option names and command names used either when
you are logged into the Web Manager, when you have selected a target devices from the spshell
menu on the MergePoint 5224/5240 SP manager console or when you are entering the ssh
command on a remote workstation. All options give access to the SP console and are only available
for managed servers with SPs.
Table 1.1: Supported Target Device Types and Management Options
Supported Service
Processors/
Devices
SP
Console
Target
Device
Console/
SoL
Power
Event
Logs
Sensors
NativeIP and
DirectCommand
ALOM
Y
Y
Y
Y
Y
N
Device N
Y
N
N
N
Y
DRAC
Y
Y
Y
Y
N
Y
iLO
Y
Y
Y
Y
N
Y
IPMI 1.5
Y
N
Y
Y
Y
N
IPMI 2.0
Y
Y
Y
Y
Y
N
RSA II
Y
Y
Y
Y
Y
Y
Table 1.2: SP Console Power Management Options
Method
Option or Command Name
Web Manager
SP Console