Viewing sensor data, Figure 3.5: example of unformatted sensor data – Avocent 5240 User Manual
Page 54
42 MergePoint 5224/5240 Service Processor Manager User Guide
To manage a server’s power through its SP (Web Manager):
1.
Log into the Web Manager.
2.
Select the Power link from the Action pull-down menu associated with the target device for
which you want to manage power.
3.
To power up the server, click the Power on link.
4.
To power down the server, click the Power off link.
5.
To reboot the server, click the Power cycle link.
6.
To check the power status of the server, click the Power status link.
7.
To reset a server from an SP, click the Reset link.
Viewing Sensor Data
Clicking the Sensors button on the Target devices screen displays the SP’s sensor plotting page.
Figure 3.5 shows the Sensors screen that displays unformatted data.
Figure 3.5: Example of Unformatted Sensor Data
Clicking the View sensor plotter button in Figure 3.5 brings up a screen allowing you to view data
from individual sensors on the server.
The sensor plotter page is shown in Figure 3.6 in the default graph format. Click the radio button
next to the desired sensor and click Display Graph to display the data from the selected sensor in
the graph area.
View Sensor Plotter Button