AVERATEC N3400 - Manual (Page 59)

45 Chapter 6 Running BIOS Setup
The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs
and maintains a variety of hardware functions. It is menu-driven software, which allows you to easily configure and change
the settings.
The BIOS contains manufacture’s default settings for the computer’s standard operations. However, there are occasions
when you may be required to modify the default settings in the BIOS.
The BIOS allows you to set up passwords to limit access to users. This is an important feature because a great deal of vital
information is carried within the computer nowadays. Unauthorized access can be prevented. Later in this chapter, you will
learn how to use this security feature.
Entering the BIOS Setup Screen
First turn on the power. When the BIOS performs the POST (Power-On Self Test), press F2 key quickly to activate the
Phoenix BIOS Setup Utility.
Leaving the BIOS Setup Screen
When you have finished modifying the BIOS settings, exit the BIOS. It takes a few seconds to record changes in the CMOS.
Note ✓ You may need to press F2 key fairly quickly. Once the system begins to load Windows, you may have to retry by cycle-power on
again