Procedure for 45° angle installation w/o studs – Audiovox SP-11CD User Manual
Page 6
4
2
Mount the unit in place, using four self-tapping screws
(M5 x 12).
Use RTV (silicone sealer) on screw threads and around
the holes to prevent moisture intrusion.
3
PROCEDURE FOR 45° ANGLE INSTALLATION W/O STUDS
1
Never mount the unit near the fuel tank.
6
MACHINE SCREW WITH FLAT
AND LOCK WASHERS (M4 x 10)
DRILL HOLES 4MM IN DIAMETER
SELF-TAPPING SCREWS
(M5 x 12)
BRACKET
(Left Side)
BRACKET
(Right Side)
BRACKET
(Left Side)
BRACKET
(Right Side)
Attach bracket to each side of the unit, using the machine
screws with flat and lock washers (M4x 10).
In the 45 position, use holes 1 and 3' as shown at left.
Set the 2 anti-vibration springs to position "45°".
NOTE: Use masking tape to cover unused
mounting holes on sides of unit.
Note
If the anti-vibration spring position has been changed and verified for 45° angle mounting (as shown on page 4), start with step 2.
Determine the mounting location, and drill four mounting holes.