Sangean DDR-43+ - Manual (Page 22)

20
Manual tuning - FM
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Radio button to select the FM band and fully
extend the Telescopic aerial for optimal FM reception.
3. Press the Tuning Up or Down buttons to tune to a station.
The frequency will change in steps of 50kHz. Pressing and holding
one of the buttons will advance the frequency selection several times
each second.
4. When the end of the waveband is reached the radio will recommence
tuning from the opposite end.
5. Set the Volume to the desired setting.
6. To switch off your sound system press the On / Standby button.
FM stereo / mono
1. If an FM station is received with a weak signal some hiss may
be audible. To reduce the hiss press and release the Select button
so that the Stereo indicator on the display is cancelled. Your radio
will switch to mono mode.
2. To return to stereo mode press and release the Select button so that
Stereo indicator on the display is visible. The radio will switch to
stereo mode.