Abocom WR5201 - Manual

1 1
1
2
3
4
5
6
7
Notes
8
1. One Wireless n/b/g Broadband Router.
2. One Power Adapter.
3. One Ethernet Network Cable.
4. One Set-up CD-ROM with User Manual.
5. One Quick Installation Guide.
2 2
3 3
Application Diagram
Connect the 802.11n b g
Wireless Router
Router Configuration
Before you begin, ensure that the Wireless Router, the
DSL/Cable modem supplied by your IP Provider, and PC are
turned off.
Connect your DSL/Cable Modem to the Internet port on the
Wireless Router using a standard RJ-45 Ethernet cable.
Connect an Ethernet cable to one of the LAN ports on the
Wireless Router to the Ethernet port on your PC.
Turn on the DSL/Cable modem first.
Then turn on your Wireless Router.
Turn on your PC.
For Windows 2000 and XP users, your computer should
obtain an IP address automatically from the Wireless
Router's DHCP server, after you've done the above steps.
Check the LEDs:
The Power, Internet, and WLAN LEDs should be ON.
For each active LAN (PC) connection, the LAN Activity
LEDs (1-4) should be ON.
Click
Start Click Control Panel Network and
Internet Connections (Right-click on) Local Area
Connection Properties.
Make sure the box next to Internet Protocol (TCP/IP) is
checked. Click the
Internet Protocol (TCP/IP) and click
the Properties button.
Select
"Obtain an IP address automatically." Select
"Obtain DNS server address automatically." Then click
OK to complete the PC configuration.
Before setting up the Wireless Router, make sure your PCs
are configured to "Obtain an IP (or TCP/IP) address
automatically."
802.11n/b/g W ireless
Broadband Router
Quick Installation Guide
Subscribed line
To PCs
S
b e
A L Ca D / l
e M d o m
Existing Connection
Power
To Internet