Installing or removing the anyfabric adapter – Lenovo ThinkServer RD650 User Manual
Page 130
2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 69.
3. Remove the server cover. See “Removing the server cover” on page 69.
4. Remove the riser card assembly 2. See “Replacing the riser card” on page 85.
5. Locate the TPM connector on the system board and then lift the installed TPM straight up.
Note: Carefully handle the TPM by its edges.
Figure 89. Removing the TPM
6. If you are instructed to return the old TPM, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 183.
Installing or removing the AnyFabric adapter
The AnyFabric adapter provides expansion connectors to connect devices, such as solid-state drives and
other expansion cards. You can purchase an AnyFabric adapter from Lenovo.
For a list of ThinkServer options, go to:
Installing the AnyFabric adapter
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Use any documentation that comes with the AnyFabric adapter and follow those instructions in addition
to the instructions in this topic.
• Depending on the model, your server might look slightly different from the illustration in this topic.
To install the AnyFabric adapter, do the following:
116
ThinkServer RD650 User Guide and Hardware Maintenance Manual