AT&T E5900B - Manual (Page 18)

16
Telephone Operation
Handset settings
Note: After selecting any option below, press the
middle Navkey button to confirm your choice.
Clock On/Off
At this menu you can choose to turn the handset time
display on or off.
Set time
Select this menu to set the time displayed on screen.
You must enter four digits (09:23). Using the NavKey,
press the
DOWN
button, then use
LEFT/RIGHT
buttons
to set AM or PM. After you set the handset time once,
it will thereafter be set automatically with incoming
Caller ID information if you have this service (see page 5).
Contrast
At this menu you can adjust screen contrast to one of
eight levels to maximize readability in different lighting
conditions.
Phone setup
Choose this option to register a new handset or select
dialing mode. To register, you must enter the 15-digit
ID number of the base. (To find this number, go to the
base, press
MENU
, scroll down to select
DISPLAY BASE
ID
, then press
OK
.)
The phone is preset at the factory to use
TONE
dialing.
You should change it to
PULSE
only if you do not have
touch-tone dialing service.
Language
At this menu you can select the language used in all
menus and screen displays. Choices are English,
Español, Français.
Reset Settings
At this menu you can delete all entries from your hand-
set phonebook, or restore all factory default settings.
Settings 1
Clock On/Off 1
Select Settings
Turn clock display on/off
Set Time 1
Set time
Contrast 1
Adjust screen contrast
Phone Setup 1
Enter base ID to register handset
Choose Tone or Pulse dialing
Language 1
Choose screen display language
Reset Settings 1
Clear phonebook
Restore factory default settings
ATT-5865CIB-d5.qxd 1/3/2004 11:28 AM Page 16