Ariens 946150 ST622 CARB - Manual (Page 17)

GB - 19
If the trimmer is to be stored for more than 30
days, follow these steps to prepare your unit.
1. Run the engine until it stops from running
out of gasoline. See Engine Manual for
specific instructions on preparing the
engine for storage.
2. Clean all dirt and debris from the trimmer.
Refer to Maintenance for cleaning
instructions.
3. Inspect unit for signs of wear, breakage or
damage. Order any parts required and
make necessary repairs to avoid delays
when beginning use again.
4. Keep all nuts, bolts and screws properly
tightened and know unit is in safe working
condition.
STORAGE
WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
SERVICE PARTS
Be sure to always use genuine Ariens parts
to keep your String Trimmer running like
new.
Part no. Qty Description
07236900 1 Drive Belt
04641800 1 Trimmer Line (Pkg of 6)
04641100 1 Height Guide
04645000 1 Long Life Height Guide
SPECIFICATIONS
Model Number 946150
Description ST622 CARB
Engine Briggs & Stratton
Quantum
Engine Power - HP
(KW) 6.25 (4.66)
Engine Operating
Fast Idle Speed -
Max. RPM
3750
Engine
Displacement
- cu. in. (cc)
11.78 (193)
Fuel See Engine Manual
for type and grade
Fuel Tank Capacity -
qt (Liters)
1.69 (1.6)
Cutting Width -
in (cm) 22 (55.88)
Handlebars Max.
Extended Height - in
(cm) 41.38 (105.11)
Minimum Folded
Height - in (cm) 19.38 (49.23)
Length - in (cm) 57.88 (147.02)
Minimum Folded
Length - in (cm) 37.25 (94.62)
Width - in (cm) 22 (55.88)
Weight - lbs (Kg) 83 (37.65)
Cutter Head Speed -
Max. RPM
3650
Drive Belt 4L Section, Single
“V” Construction,
Raw Edge Kevlar
Cord
Wheel Size -
in (cm)
14 (35.56)
Replacement Line
Length - in. (cm)
Diameter -
in. (cm)
18 (46)
5/32 (0.40)