Lenovo H500s Desktop - Manual (Page 47)

42
User Guide
To replace a memory module:
1. Remove the computer cover. Refer to “Removing the computer cover”.
Note: For this procedure, it helps to lay the computer on a flat, stable
surface.
2. Locate the memory module connectors. Refer to “Locating components”.
3. Remove the memory module being replaced by opening the retaining clips as
shown.
4. Insert the notched end of the new memory module into the slot. Press the
memory module firmly and pivot the memory module until it snaps into place.
Make sure that the memory module is secured in the slot and does not move
easily.
5. Refer to “Completing the installation”.