Alpine IDA-X100 - Manual (Page 26)

24
-EN
Recalling the Audio Adjustment Level
You can recall the contents stored in “Storing the Audio Adjustment
Level” (page 23).
1
Rotate the Double Action encoder to select “User
Preset”, and then press
/ENTER.
The User Preset screen is displayed.
2
Rotate the Double Action encoder to select a
preset number, and press
/ENTER.
Adjusted/set contents of the selected number are recalled.
• The User Preset screen can also be recalled in normal mode by
pressing and holding PRESET for at least 2 seconds.
Setting the Subwoofer (Subwoofer System)
The setting is available only when “Turning Subwoofer ON/OFF”
(page 19) is set to On.
Turning Media Xpander ON/OFF
When the Media Xpander is on, and external audio processor is
connected, you can adjust the Media Xpander level (For details, refer to
external audio processor’s Owner’s manual).
• Displayed only when external audio processor is connected.
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPod, will be able to reproduce the music clearly even in cars with a lot
of road noise.
• Displayed only when external audio processor is connected, and MX
is set to ON.
Subwoofer On and Off
If an optional subwoofer is connected to the unit, make the following
setting.
• Displayed only when external audio processor is connected.
How to View the Display
<XM screen display example>
1 Mode display
2 Channel number
3 Radio station name
4 Song title
5 Artist title
6 Category name
7 Calendar/Time
<SIRIUS screen display example>
1 Mode display
2 Channel number
3 Radio station name
4 Song title
5 Artist title
6 Category name (Composer name)
7 Calendar/Time
Sys 1 (Initial Setting) / Sys 2
Sys 1 : Subwoofer level changes according to the main
volume setting.
Sys 2 : Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
MX On / MX Off (Initial Setting)
Non Effect / Level 1 / Level 2 / Level 3 (Initial Setting)
Subwoofer On (Initial setting) / Subwoofer Off
SAT Radio Receiver
(Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is
connected via the Ai-NET bus, the following
operations may be performed. However, the XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box. Not all SIRIUS Receivers have
identical functions and some may not be performed
on this unit. For details about individual functions,
refer to the SIRIUS Receiver’s Owner’s Manual.
/ BAND
SOURCE
PRESET
VIEW
/ENTER
Double Action encoder
FUNC./SETUP
3
4
5
6
2
1
7
3
4
5
6
2
1
7