Bizhub 501 series – Konica Minolta bizhub 421 User Manual
Page 9
Network Configuration
4
AU-211P
54
-
Press Fix
The folllowing settings are optional an will be determined by the
customer environment, the Installation Survey & Checklist and the Ping
Confirmation Test which is performed during the network configuration
process.
-
Bit Assignement
00011100
Enable PrincipleName, FQDN & LDAP w/SSL
-
Press Fix
Scan to Me/Scan to Home
If the customer requires Scan to Me/Scan to Home the following soft switch
will have to be enbled. Please reference the Installation Survey & Checklist
-
Enter Service Mode
-
Enter System 2-> Soft Switch Settings
-
Switch No.
26
-
HEX Assignment
10 (to enable)
-
HEX Assignment
00 (to disable) *Default
-
Press Fix
bizhub 501 series
Network Environment Settings
The following soft switch setting is manditory
-
Enter Service Mode
-
Enter System 2-> Soft Switch Settings
-
Switch No.
44
-
Bit 2 = ON
Enable PrincipleName ‘
user
@mil’
-
Press Set
-
Bit 3 = ON
Enable FQDN
-
Press Set
The folllowing settings are optional an will be determined by the
customer environment, the Installation Survey & Checklist and the Ping
Confirmation Test which is performed during the network configuration
process.
-
Bit 1 = Enable LDAP w/SSL
-
Bit 5= Enable Scan to Me and Scan to Home
-
Bit 6= Enable Scan to Me and SMB