Konica Minolta bizhub PRO C1060L - Manual (Page 112)

7-10
7.3 Convenient Use of Scan Function (Scan to SMB)
C
Enable the SMB-base sharing.
Click [Options] on the [Sharing] window, select the [Share files and folders using SMB (Windows)] check
box, then select the check box of the login user name (displayed name).
D
Set to a shared folder.
Click [+] on the [Sharing] window, select a folder to be shared, then click [Add]. Then, check that the user
name and access rights of the folder are set to the [Read/Write] mode.
Step 2: Connect this machine to the network
To connect this machine to the network, check that:
- The LAN cable is connected.
- The IP address is assigned to this machine.
Reference
To configure the network settings, select [Administrator Setting] - [Network Setting] - [NIC Setting]. For details, refer
to the HTML User's Guide.
Step 3: Prepare the operating environment for SMB transmission
Enable the SMB transmission function.
- Set [SMB Send Setting] of this machine to [Enable] (in general use, you do not need to change the default
setting).
- When using the Image Controller IC-602 and Mac OS X 10.7 or later, the following setting is required.
- NTLM Setting
The NTLM setting is only available for v2. Specify items including NTLM v2.
- Date/Time Setting
Specify the date and time of this machine and computer, including the time zone.
Reference
For details about various settings, refer to the HTML User's Guide.
Step 4: Configure settings according to your environment
Register destinations that are frequently used.
- This can save many steps to manually enter destinations.
- Select [SCAN] screen of this machine to register the SMB server setting.
- You can also use [Scan Address Register] in Utility/Counter to register the setting.
Reference
For details about how to register destinations, refer to the HTML User's Guide.
Step 5: Send scan data to a public folder
Send scan data to a public folder of the registered SMB server.
Select an SMB destination on the [SCAN] screen of this machine, specify scan conditions, then press Start.
Reference
You can specify conditions such as the image quality and scanning size. For details about scan conditions, refer to
the HTML User's Guide.