Konica Minolta SL1000 - Manual (Page 66)

SL1000 User’s Guide
3-40
2. Delete Deletes registered custom profile.
When deleted "Custom Profile" is selected, and "Delete" is clicked, the
custom profile is deleted.
NOTE !  The custom profile of "Default" cannot delete.
3. Save The custom profile which input is preserved.
When "Save" is clicked after "Custom Profile" is input, the custom
profile is preserved.
The following setting can be saved in a custom profile.
1) Film Type, 2) Film Polarity, 3) Zoom, 4) Horizontal Flip,
5) Image Rotation and 6) Toolbar Setting etc.
NOTE !  If the Custom Profile is set to Default, Film polarity,
Zoom Range, Horizontal Flip, Image Rotation and Tool
Bar Setting can not be changed and saved in a Custom
Profile unless the Film Type is set to “Custom”.
 The user of each logon user of Windows is preserved.
4. Film Type The Film Type is selected.
NOTE !  When the Custom Profile is newly registered, the
current setting value in the application software is to be
the default value in the “Custom”.
5. Show Roll Film
Carrier
When “Custom" is selected in Film Type, the "Roll Film Carrier" screen
is displayed.
6. Zoom The zoom magnification is set.
7. Film Polarity The polarity of the film used is selected.
8. Film Color The color of the film used is selected.
9. Horizontal Flip The image is flipped to right and left.
10. Rotate The image rotation is selected.
NOTE !  Please refer to "3.2 Film Selection" for details
concerning items (10 from 4).
11. OK Customer is registered by the selected setting condition.
NOTE !  When "Preferences" is closed after Custom Setting is
executed, Film Selection is executed under the
registered Custom Setting condition.
12. Cancel It ends without registering custom profile.