Konica Minolta magicolor plus - Manual (Page 26)

E-26
Update the Copyboard’s Internal Program
Download the update program from the PLUS Vision website.
Preparations:
1.
Download the “Copyboard Firmware Update” program (“M-12_XX_XX.zip”) from the PLUS Vision website.
2.
Unzip the “M-12_XX_XX.zip” file and save the program file (“m12_XX_XX.mot”).
For model M-125, save M-125_XX_XX.mot.
3.
If the copyboard’s power cord is plugged into an outlet, unplug it.
4.
Plug in the copyboard’s power cord while pressing the Save button.
5.
Once “UP” is displayed flashing in the display window, execute “Copyboard Firmware Update”.
Displaying the “Copyboard Firmware
Update” screen.
When a USB connection has been established between
the personal computer and the Copyboard, the
[Copyboard Firmware Update] screen will be displayed
automatically.
Open the “m12_XX_XX.mot” update
file.
① Click “Open file” to display the screen for opening
the file.
② Select the M-12 update file (“m12_XX_XX.mot”),
then click the “Open” button.
Click the “Update” button to start
updating.
A status bar is displayed during updating. Please wait.
When the update is completed, “
” will be displayed
flashing in the display window of the Copyboard control
panel.
Notice
Do not perform other operations or turn off the
copyboard’s power during updating.
Doing so could damage the copyboard.
After “ ” has begun flashing in the display window of
the Copyboard, unplug the power plug from the power
outlet, and then plug it in again.